Reverb Nodes

  • This is was built using the JC reverb implentation found in FAUST. According to the source code, the specifications for this implementation were found on an old SAIL DART backup tape. This class is derived from the CLM JCRev function, which is based on the use of networks of simple allpass and comb delay filters. This class implements three series allpass units, followed by four parallel comb filters, and two decorrelation delay lines in parallel at the output.

    See more

    Declaration

    Swift

    open class AKChowningReverb: AKNode, AKToggleable, AKComponent, AKInput
  • This filter reiterates the input with an echo density determined by loop time. The attenuation rate is independent and is determined by the reverberation time (defined as the time in seconds for a signal to decay to 1/1000, or 60dB down from its original amplitude). Output will begin to appear immediately.

    See more

    Declaration

    Swift

    open class AKFlatFrequencyResponseReverb: AKNode, AKToggleable, AKComponent, AKInput